Введение
DROPS 214-49
winterwispsset
DROPS design: Pattern x-450
Yarn group C or A + A
SIZE
S/M - L/XL
MATERIALS
DROPS ALASKA from Garnstudio (belongs to yarn group C)
350-400 g colour 03, light grey
SIZE
One-size
Head circumference: 54/56 cm - or desired length.
MATERIALS
DROPS ALASKA from Garnstudio (belongs to yarn group C)
100 g colour 03, light grey
Materials & Sizes
KNITTING TENSION
18 stitches in width and 23 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 4.5 mm: Length 40 cm for stocking stitch.
DROPS CABLE NEEDLE: for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M - L/XL
Measurements:
Length: approx. 32-34 cm measured after rib in the neck.
Shoulder width: approx. 34 - 39 cm
MATERIALS
DROPS ALASKA from Garnstudio (belongs to yarn group C)
200-200 g colour 03, light grey
Materials & Sizes
KNITTING TENSION
18 stitches in width and 23 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 5.5 mm: Length 60 cm for stocking stitch.
DROPS CIRCULAR NEEDLE SIZE 4.5 mm: Length 40 cm for rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M - L/XL
MATERIALS
DROPS ALASKA from Garnstudio (belongs to yarn group C)
100-100 g colour 03, light grey
Materials & Sizes
KNITTING TENSION
19 stitches in width and 25 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 4 mm
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 mm
DROPS CABLE NEEDLE: for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
You might also like...
Women Accessories Headbands Neck Warmers Gloves & Mittens Mittenscable high neck saddle shoulder
Pattern instructions
Keep the screen on while knitting
Tools
EXPLANATION FOR THE PATTERN
GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.
PATTERN
Head band: See diagram A.1.
Neck warmer: See diagram A.2.
Mittens: See diagrams A.3, A.4 and A.5.
Diagrams show all rows in pattern seen from the right side.
INCREASE TIP-1 (applies to neck warmer):
BEFORE MARKER
The new stitch will be twisted, leaning towards the right.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from behind and knit stitch in front loop.
AFTER MARKER
The new stitch will be twisted, leaning towards the left.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from the front and knit stitch in back loop.
INCREASE TIP-2 (evenly):
To calculate how to increase evenly, use the total number of stitches on row (e.g. 54 stitches), and minus stitches in garter stitch in each side (e.g. 4 stitches) and divide stitches by number of increases to be done (e.g. 12) = 4.1. In this example increase by making 1 yarn over after approx. every 4th stitch. On next row work yarn overs twisted to avoid holes.
INCREASE TIP-3 (applies to mittens):
Increase 1 stitch by making 1 yarn over. On next round knit yarn over twisted to avoid holes.
DECREASE TIP
Decrease in stocking stitch section on the under side of mitten as follows:
Decrease as follows after marker: Slip 1 stitch knitwise, knit 1, pass slipped stitch over (= 1 stitch decreased), work until 2 stitches remain before next marker, knit 2 together (= 1 stitch decreased).
HEAD BAND - SHORT OVERVIEW OF THE PIECE
Work piece back and forth on circular needle and sew together when finished.
HEAD BAND
Cast on 31 stitches on circular needle size 4.5 mm with Alaska. Purl 1 row from wrong side. Then work pattern from right side as follows: 2 edge stitches in GARTER STITCH - see explanation above, A.1 over the next 27 stitches, 2 edge stitches in garter stitch. Continue back and forth like this. REMEMBER THE KNITTING TENSION! Continue like this until piece measures 49 cm, or desired length - adjust to finish after or 4th or 10th row in A.1. Cast off. Sew together head band inside cast-on and cast-off edge.
NECK WARMER - SHORT SUMMARY OF PIECE
Worked top down. First work in the round until increase for shoulder is done. Then finish front piece and back piece separately.
NECK WARMER
Cast on 76-84 stitches on a short circular needle size 4.5 mm with Alaska. Knit 1 round. Then work rib as follows: (Knit 2/purl 2) over the first 12-16 stitches, insert 1st marker here, work A.2 over the next 12 stitches (= shoulder stitches), insert 2nd marker here, purl 2, (knit 2/purl 2) over the next 24-28 stitches, insert 3rd marker here, work A.2 over the next 12 stitches (= shoulder stitches), insert 4th marker here, purl 2, (knit 2/purl 2) over the last 12-12 stitches. Continue in the round like this for 8 cm. Switch to circular needle size 5.5 mm. Insert a marker at beginning of round. Now measure piece from here. Now work pattern as follows:
SADDLE SHOULDER INCREASE
Continue with A.2 over shoulder stitches in each side and work in stocking stitch over the remaining stitches on round, at the same time on first round increase 4 stitches: Increase BEFORE 1st and 3rd marker, and AFTER 2nd and 4th marker- read INCREASE TIP-1. There are only increases on back piece and front piece and number of shoulder stitches remains the same. Increase like this on every round 14-16 times in total = 132-148 stitches. REMEMBER THE KNITTING TENSION!
Work next round as follows: Knit until shoulder stitches, cast off with knit over knit and purl over purl over the 12 shoulder stitches, knit over the next 54-62 stitches before slipping them on a stitch holder for front piece, cast off the next 12 shoulder stitches, knit over all the 54-62 stitches on back piece.
BACK PIECE
Work in stocking stitch back and forth with 2 edge stitches in GARTER STITCH - read explanation above, in each side. When neck warmer measures 27-29 cm from marker inserted after the neck, increase 12-16 stitches evenly - read INCREASE TIP-2 = 66-78 stitches.
Switch to circular needle size 4.5 mm. Now work rib from right side as follows: 2 stitches in garter stitch, (knit 2/purl 2) until 4 stitches remain, knit 2, 2 stitches in garter stitch. Continue rib like this for 5 cm. Cast off with knit over knit and purl over purl (cast off stitches in garter stitch by knitting).
Neck warmer measures approx. 32-34 cm from marker.
FRONT PIECE
Slip stitches from stitch holder back on circular needle 5.5 and work as back piece.
MITTENS - SHORT OVERVIEW OF THE PIECE
Worked in the round on double pointed needles.
LEFT MITTEN
Cast on 40-44 stitches on double pointed needles size 3.5 mm with Alaska. Knit 1 round. Work rib (knit 2/purl 2) in the round for 4 cm. Work next round as follows: Knit 0-3 stitches. Insert a marker here. This is beginning of round. Work next round as follows: Knit 2-3, work A.3 over the next 18 stitches (= 1 stitch increased), knit 2-3, knit 2 together (= 1 stitch decreased), knit the last 16-18 stitches = 40-44 stitches. Work 1 round with knit over knit and A.3 over A.3.
Switch to double pointed needles size 4 mm. Then work pattern as follows: Knit 2-3, A.4 over A.3, knit the next 19-22 stitches on round. REMEMBER THE KNITTING TENSION!
When piece measures 8-8 cm, increase 1 stitch on each side of last stitch on round for thumb (= 2 stitches increased) - read INCREASE TIP-3. Increase like this on outside of the increased stitches every other round 5-6 times in total = 50-56 stitches. Now slip the 11-13 thumb stitches on 1 stitch holder.
Work pattern in the round as before in the round on mitten and cast on 1 new stitch behind thumb on next round = 40-44 stitches. Continue like this until A.4 has been worked 4 times vertically. Mitten now measures approx. 23 cm from cast-on edge. Insert 1 marker at beginning of round and 1 marker after 23-25 stitches (= 23-25 stitches on top of mitten and 17-19 stitches on the under side of mitten). Now work A.5 over A.4, AT THE SAME TIME on next round decrease on the under side of mitten - read DECREASE TIP. Decrease like this every other round 5 times and every round 2 times. When diagram has been worked vertically, there are 12-16 stitches on round. Work 1 round where all stitches are knitted together 2 by 2 = 6-8 stitches. Cut the yarn and pull it through the remaining stitches, tighten together and fasten.
THUMB
Slip the 11-13 thumb stitches back on double pointed needles size 4 mm. Pick in addition up 4 stitches behind thumb = 15-17 stitches. Work in stocking stitch until the thumb itself measures approx. 5-5½ cm (try on the mitten, approx. ½ cm remains until finished measurements). Knit 2 rounds AT THE SAME TIME knit all stitches together 2 by 2 on both rounds. Cut the yarn and pull it through the remaining stitches, tighten together and fasten.
RIGHT MITTEN
Cast on and work as left mitten but increase for thumb on each side of the 24th-26th stitch (= 3rd-4th stitch with stocking stitch after A.4).
This pattern has been corrected. Click here to see the correction/s.
Diagram
= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= this square is not a stitch, go directly to next symbol in diagram
= between 2 stitches make 1 yarn over, on next row purl yarn over (to make holes)
= knit 3, pass first stitch worked over the other 2 so that this stitch is around the last two stitches worked (= 1 stitch decreased)
= slip 5 stitches on cable needle behind piece, knit 5, knit 5 from cable needle
= slip 5 stitches on cable needle in front of piece, knit 5, knit 5 from cable needle
= slip 4 stitches on cable needle behind piece, knit 4, knit 4 from cable needle
= slip 3 stitches on cable needle in front of piece, knit 3, knit 3 from cable needle
= purl 1 and make 1 yarn over. On next round knit yarn over twisted to avoid holes.
= purl 2 together (= 1 stitch decreased)
= knit 2 together (= 1 stitch decreased)
= slip 1 stitch knitwise, knit 1, pass slipped stitch over (= 1 stitch decreased)
