Введение
DROPS 214-35
pepperminttwistset
DROPS design: Pattern me-217
Yarn group B
SIZE
S/M - M/L
MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
250-300 g colour 31, forest green
SIZE
One-size
Head circumference: approx. 54/56 cm - or desired circumference.
MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
50-50 g colour 31, forest green
Materials & Sizes
KNITTING TENSION
21 stitches in width and 28 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 4 mm. Length 40 cm.
DROPS CABLE NEEDLE - for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M - M/L
Measurements: Length: approx. 17-21 cm from shoulder and down (+ 7 cm neck edge).
MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
150-150 g colour 31, forest green
Materials & Sizes
KNITTING TENSION
21 stitches in width and 28 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 4 mm : Length 60 and 80 cm.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M - M/L
MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
100-100 g colour 31, forest green
Materials & Sizes
KNITTING TENSION
22 stitches in width and 30 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 mm
DROPS DOUBLE POINTED NEEDLES SIZE 3 mm: for rib
DROPS CABLE NEEDLE - for cables.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
You might also like...
Women Accessories Headbands Neck Warmers Gloves & Mittens Mittenscable high neck
Pattern instructions
Keep the screen on while knitting
Tools
EXPLANATION FOR THE PATTERN
GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.
PATTERN
Head band: See diagram A.1.
Neck warmer: See diagrams A.2 and A.3
Mittens: See diagrams A.4 and A.5.
Diagrams show all rows in pattern seen from the right side.
INCREASE TIP-1 (evenly):
To calculate how to increase evenly, use the total number of stitches on row (e.g. 124 stitches) and divide stitches by number of increases to be done (e.g. 28) = 4.4.
In this example increase by making 1 yarn over after alternately approx. every 4th and 5th stitch. On next row work yarn overs twisted to avoid holes.
INCREASE TIP-2 (applies to mittens):
Work until stitch with marker, make 1 yarn over, knit 1 (= stitch with marker), make 1 yarn over (= 2 stitches increased). On next round knit yarn overs twisted to avoid holes.
Work next increase as follows: Work until 1 stitch remains before stitch with marker, make 1 yarn over, knit 3, make 1 yarn over (= 2 stitches increased). Continue increase like this every other round, i.e. always increase on the outside of the increased stitches.
DECREASE TIP (applies to mittens):
Decrease inside palm as follows:
Work stocking stitch and pattern as before until first marker, knit 1, slip 1 stitch knitwise, knit 1, pass slipped stitch over, work in stocking stitch until 3 stitches remain before next marker thread, knit 2 together, knit 1 (= 2 stitches decreased).
RAGLAN
Increase 1 stitch on each side of every A.2 by making 1 yarn over (= 8 stitches increased on round). On next round work yarn overs twisted to avoid holes.
Work the new stitches in rib (= knit 2/purl 2) on shoulders and work in stocking stitch on front and back piece.
HEAD BAND - SHORT OVERVIEW OF THE PIECE
Work back and forth with circular needle and sew together mid back.
HEAD BAND
Cast on 32 stitches on circular needle size 4 mm with Merino Extra Fine. Purl 1 row from wrong side. Then work pattern A.1 over all stitches on needle. REMEMBER THE KNITTING TENSION! Repeat diagram until head band measures 49 cm - or desired length, and adjust to finish after a whole repetition vertically. Cast off stitches with knit over knit and purl over purl. Sew together head band mid back with grafting/kitchener stitches inside cast-on and cast-off edge.
NECK WARMER - SHORT SUMMARY OF PIECE
Worked in the round on circular needle, top down.
NECK WARMER
Cast on 124-128 stitches on circular needle size 4 mm with Merino Extra Fine. Work rib (knit 2/purl 2) in the round for 7 cm. Knit 1 round while increasing 28-32 stitches evenly - read INCREASE TIP-1 = 152-160 stitches. Knit 1 round. Knit 1 and insert a marker thread here (= in the middle of 2 knit stitches). This is now the beginning of round.
Now work pattern as follows: Knit 11-13 (= approx. half back piece), A.2 over the next 20 stitches (= in transition between back piece and right shoulder), work (purl 2/knit 2) over the next 12 stitches, purl 2 (= right shoulder), A.2 over the next 20 stitches (= in transition between right shoulder and front piece), knit the next 22-26 (= front piece), A.2 over the next 20 stitches (= in transition between front piece and left shoulder), work (purl 2/knit 2) over the next 12 stitches, purl 2 (= left shoulder), A.2 over the next 20 stitches (= in transition between left shoulder and back piece), knit the next 11-13 (= approx. half back piece). REMEMBER THE KNITTING TENSION!
Continue pattern in the round like this, and on 2nd round in pattern begin increase for RAGLAN – read explanation above. Increase like this every other round 16-20 times in total = 280-320 stitches.
In size S/M A.2 is worked 3 times vertically + the first 2 rounds in A.2 (= 32 rounds with pattern). Continue as explained below.
In size M/L A.2 is worked 4 times vertically. Work 2 more rounds with knit over knit and purl over purl (= 42 rounds with pattern). Continue as explained below.
Both sizes:
Work next round as follows: Knit the first 27-33 (i.e. until the first repetition of A.2). Insert 1 marker here. This is now the beginning of round.
Work A.3 over A.2, work rib (= purl 2/knit 2) over the next 44-52 stitches, purl 2, A.3 over A.2, knit 1, * make 1 yarn over, purl 1, knit 2 , work from - 17-21 times in total (= over 51-63 stitches), make 1 yarn over, purl 1, knit 1. Repeat 1 more time on round = 316-364 stitches.
Work next round as follows:
Work knit over knit and purl over purl over the first 86-94 stitches, knit 1, * purl yarn over twisted, purl 1, knit 2 , work from - 17-21 times in total, purl yarn over twisted, purl 1, knit 1. Repeat 1 more time on round.
Continue in the round with knit over knit and purl over purl until 6 rounds rib have been worked. Cast off stitches with knit over knit and purl over purl. Cut and fasten the yarn.
MITTENS - SHORT OVERVIEW OF THE PIECE
Worked in the round on double pointed needles.
RIGHT MITTEN
Cast on 44-48 stitches on double pointed needles size 3 mm with Merino Extra Fine. Work rib (knit 2/purl 2) in the round for 4-5 cm. Switch to double pointed needles size 3.5 mm.
Work next round as follows: Knit 0-2, insert a marker thread here (= beginning of round), knit the next 2-4, make 1 yarn over, work knit over knit and purl over purl over the next 18 stitches, make 1 yarn over, knit the rest of round = 46-50 stitches.
Now work pattern as follows: Knit 2-4, A.4 over the next 20 stitches (purl yarn overs from previous round twisted to avoid holes), knit the rest of the round. Continue pattern in the round like this. REMEMBER THE KNITTING TENSION!
When piece measures approx. 6-7 cm, insert 1 marker in the 25th-29th stitch on round (= thumb stitch).
Now increase for thumb gusset by increasing 1 stitch on each side of stitch with marker - read INCREASE TIP-2(= 2 stitches increased). Continue increase for thumb gusset every other round 4-5 more times (= 5-6 times in total)= 56-62 stitches. Continue to work without increase until piece measures 9-11 cm. On next round slip the next 11-13 thumb gusset stitches on a stitch holder, continue in the round with pattern and in stocking and at the same time cast on 1 new stitch on needle over stitches on stitch holder = 46-50 stitches.
Then work until A.4 has been worked 4 times vertically. Piece should now measure approx. 17-18 cm (approx. 5 cm remain until finished measurements, try the mitten on and work to desired length). Insert 1 marker thread in each side so that there are 1-2 knit stitches between marker thread stitch and A.4 in each side. There are 24-26 knit stitches between marker threads inside mitten. Now work A.5 over A.4, and when you have worked up to round with arrow in diagram, continue pattern as before and begin decrease – read DECREASE TIP.
Decrease like this every other round 3 times and every round 5 times. When decrease is done and A.5 has been worked vertically, 19-23 stitches remain on round. Knit together 2 by 2 until 5-6 stitches remain on round. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Mitten measures approx. 22-23 cm from top and down.
THUMB
Slip the 11-13 thumb gusset stitches from stitch holder back on double pointed needles size 3.5 mm and pick in addition up 4-3 stitches behind thumb = 15-16 stitches. Work in stocking stitch in the round until the thumb measures 5-5½ cm (approx. ½ cm remain until finished measurements, try the mitten on and work to desired length). Knit stitches together 2 by 2 until 4 stitches remain on round. Cut the yarn and pull it through the remaining stitches, tighten together and fasten.
LEFT MITTEN
Cast on 44-48 stitches on double pointed needles size 3 mm with Merino Extra Fine. Work rib (knit 2/purl 2) in the round for 4-5 cm. Switch to double pointed needles size 3.5 mm.
Work next round as follows: Knit 0-2, insert a marker thread here (= beginning of round), knit the next 2-4, make 1 yarn over, work knit over knit and purl over purl over the next 18 stitches, make 1 yarn over, knit the rest of round = 46-50 stitches.
Now work pattern as follows: Knit 2-4, A.4 over the next 20 stitches (purl yarn overs from previous round twisted to avoid holes), knit the rest of the round. Continue pattern in the round like this.
When piece measures 6-7 cm, insert 1 marker in the last stitch on round (= thumb stitch).
Now increase for thumb gusset by increasing 1 stitch on each side of stitch with marker - read INCREASE TIP (= 2 stitches increased). Continue increase for thumb gusset every other round 4-5 more times (= 5-6 times in total)= 56-62 stitches. Continue to work without increase until piece measures 9-11 cm. On next round slip the next 11-13 thumb gusset stitches on a stitch holder, continue in the round with pattern and in stocking and at the same time cast on 1 new stitch on needle over stitches on stitch holder = 46-50 stitches.
Then work until A.4 has been worked 4 times vertically. Piece should now measure approx. 17-18 cm (approx. 5 cm remain until finished measurements, try the mitten on and work to desired length).
Insert 1 marker thread in each side so that there are 1-2 knit stitches between marker thread stitch and A.4 in each side. There are 24-26 knit stitches between marker threads inside mitten.
Now work A.5 over A.4, and when you have worked up to round with arrow in diagram, continue pattern as before and begin decrease – remember DECREASE TIP. Decrease like this every other round 3 times and every round 5 times. When decrease is done and A.5 has been worked vertically, 19-23 stitches remain on round. Knit stitches together 2 by 2 until 5-6 stitches remain on round. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Mitten measures approx. 22-23 cm from top and down. Work thumb the same way as on right mitten.
This pattern has been corrected. Click here to see the correction/s.
Diagram
= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= slip 4 stitches on cable needle behind piece, knit 2, knit 4 from cable needle
= slip 2 stitches on cable needle in front of piece, knit 4, knit 2 from cable needle
= slip 2 stitches on cable needle in front of piece, purl 1, knit 2 from cable needle
= slip 1 stitch on cable needle behind piece, knit 2, purl 1 from cable needle
= slip 2 stitches on cable needle in front of piece, knit 2, knit 2 from cable needle
= slip 1 stitch knitwise, knit 1, pass slipped stitch over (= 1 stitch decreased)
= knit 2 together (= 1 stitch decreased)
= On this round begin decrease on inside of mitten (in addition to stitch decreased in diagram at the front of mitten)
