Введение
DROPS 203-14
laceylaurelsshawl
DROPS Design: Pattern no z-874
Yarn group A
SIZES
SIZES
SHAWL: One-size
Height: Measured in middle = approx. 65 cm.
Width: Measured along top = approx. 195 cm.
HAT: S/M – L/XL
Fits head size: Approx. 54/56 – 58/60 cm.
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
450-450 g colour 9025, hazelnut
SIZES
SIZES
S/M – L/XL
Fits head size: Approx. 54/56 – 58/60 cm
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
50-100 g colour 9025, hazelnut
Materials & Sizes
KNITTING TENSION
24 stitches in width and 32 rows in height with stocking stitch = 10 x 10 cm.
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM.
DROPS CIRCULAR NEEDLE SIZE 3 MM: Length 40 cm.
DROPS CIRCULAR NEEDLE SIZE 2.5 MM: Length 40 cm for rib.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.
SIZE
Height: Measured in middle = approx. 65 cm.
Width: Measured along top = approx. 195 cm.
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
400 g colour 9025, hazelnut
Materials & Sizes
KNITTING TENSION
24 stitches in width and 32 rows in height with stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 3 MM: Length 80 cm.
NOTE: Due to the number of stitches it might be a good idea to divide the piece onto several needles of the same size.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.
You might also like...
Women Accessories Big Shawls Hats Shawls Beaniesleaf pattern
Pattern instructions
Keep the screen on while knitting
Tools
EXPLANATIONS FOR THE PATTERN
RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge in height = Knit 2 rows.
PATTERN
Hat: See diagrams A.1B and A.3B.
Shawl: See diagrams A.1 to A.8.
The diagrams show all rows in the pattern seen from the right side.
DIAGRAM TIP
This pattern contains many diagrams; it might be a good idea to cut out all the diagrams and arrange them in the right order (see the order given in the text).
INCREASE/DECREASE TIP (evenly spaced on hat):
To work out how to increase/decrease evenly, count the total number of stitches on needle (e.g. 122 stitches) and divide by the number of increases/decreases to be made (e.g. 10) = 12.2. In this example, increase by making 1 yarn over after approx. each 12th stitch. On the next round work the yarn overs twisted to avoid holes. When decreasing, work together approx. each 11th and 12th stitch.
INCREASE/DECREASE TIP (evenly spaced on shawl):
To work out how to increase/decrease evenly on each side of the middle stitch, count the total number of stitches on needle (e.g. 81 stitches) minus the edge stitches and middle stitch (5 stitches) and divide the remaining stitches by 2 ( to find the number of stitches on each side of the middle stitch). Then divide these stitches by the number of increases/decreases to be made on each side (e.g. 18) = 2.1. In this example, increase by making 1 yarn over after approx. each 2nd stitch. Do not increase over edge stitches or middle stitch.
When decreasing, work approximately all stitches together 2 and 2.
HAT – SHORT OVERVIEW OF THE PIECE
The piece is worked in the round with short circular needle, bottom up. Change to double pointed needles when necessary.
HAT
Cast on 120-126 stitches with short circular needle size 2.5 mm and Alpaca. Knit 1 round. Then work rib in the round (= knit 1 / purl 1) for 5-6 cm.
Knit 1 round where you increase 12-28 stitches evenly spaced – read INCREASE/DECREASE TIP = 132-154 stitches.
Change to circular needle size 3 mm and work A.3B in the round (= 6-7 repeats of 22 stitches). REMEMBER THE KNITTING TENSION!
When A.3B has been completed the piece measures approx. 16-17 cm from the cast-on edge.
Knit 1 round where you increase 12-14 stitches evenly spaced = 144-168 stitches.
Work A.1B. AT THE SAME TIME on the last round in A.1B decrease 16-24 stitches evenly spaced = 128-144 stitches. Work A.1B one more time in height. AT THE SAME TIME on the last round in A.1B knit all stitches together 2 and 2 = 64-72 stitches.
Then work stocking stitch. AT THE SAME TIME, on every 2nd round, knit all stitches together 2 and 2 until there are 8 stitches left. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The hat measures approx. 26-27 cm from the top down.
SHAWL - SHORT OVERVIEW OF THE PIECE
The piece is worked back and forth with circular needle, top down. Due to the number of stitches it might be a good idea to divide the piece onto several needles of the same size.
SHAWL
Cast on 7 stitches with circular needle size 3 mm and Alpaca. Knit 1 row (= wrong side).
Then work and increase as follows:
ROW 1 (= right side): Work 2 edge stitches in GARTER STITCH – read description above, 1 yarn over, work 1 stitch in stocking stitch, 1 yarn over, 1 stitch in stocking stitch (= middle stitch), 1 yarn over, 1 stitch in stocking stitch, 1 yarn over and finish with2 edge stitches in garter stitch (= 4 stitches increased).
ROW 2 (= wrong side): Work 2 edge stitches in garter stitch, 1 yarn over, work stocking stitch until there are 2 stitches left on the row (yarn overs purled to leave holes), 1 yarn over and finish with 2 edge stitches in garter stitch (= 2 stitches increased).
ROW 3 (= right side): 2 edge stitches in garter stitch, 1 yarn over, work stocking stitch as far as the middle stitch, 1 yarn over, 1 stitch in stocking stitch (= middle stitch), 1 yarn over, work stocking stitch until there are 2 stitches left on the row, 1 yarn over and finish with 2 edge stitches in garter stitch (= 4 stitches increased).
ROW 4 (= wrong side): 2 edge stitches in garter stitch, 1 yarn over, work stocking stitch until there are 2 stitches left on the row (yarn overs purled to leave holes), 1 yarn over and finish with 2 edge stitches in garter stitch (= 2 stitches increased).
Repeat rows 3 and 4 until there are 83 stitches on the needle and the last row was worked from the right side. REMEMBER THE KNITTING TENSION!
Work the next row in the same way as row 4 (= wrong side) and increase at the same time 17 stitches evenly spaced on each side of the middle stitch (34 stitches increased on row in addition to the increase worked inside the 2 edge stitches on each side) – read INCREASE/DECREASE TIP = 119 stitches on the needle.
Work diagrams A.1 and A.2 as follows from the right side:
Work 2 edge stitches in garter stitch, A.1A over 2 stitches (1 time in width), A.1B over 52 stitches (26 times in width), A.1C over 3 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), work A.2A over 3 stitches, A.2B over 52 stitches (26 times in width), A.2C over 2 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.1 and A.2 remains there are 159 stitches on the needle. Work the last row and at the same time decrease 5 stitches evenly spaced on each side of the middle stitch (10 stitches decreased evenly + 2 stitches increased in diagrams) – read INCREASE/DECREASE TIP = 151 stitches.
Work diagrams A.3 and A.4 as follows from the right side:
Work 2 edge stitches in garter stitch, A.3A over 14 stitches (1 time in width), A.3B over 44 stitches (2 times in width), work A.3C over 15 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), work A.4A over 14 stitches, A.3B over 44 stitches (2 times in width), A.4C over 15 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.3 and A.4 remains there are 263 stitches on the needle. Work the last row and, at the same time, increase 43 stitches evenly spaced on each side of the middle stitch (86 stitches increased evenly and 2 stitches increased in diagrams) = 351 stitches.
Work diagrams A.1 and A.2 as follows from the right side:
Work 2 edge stitches in garter stitch, A.1A over 2 stitches (1 time in width), A.1B over 168 stitches (84 times in width), work A.1C over 3 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.2A over 3 stitches, A.2B over 168 stitches (84 times in width), work A.2C over 2 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.1 and A.2 remains there are 391 stitches on the needle. Work the last row and increase at the same time 1 stitch on each side of the middle stitch (2 stitches increased evenly and 2 stitches increased in diagrams) = 395 stitches.
Now work A.1 and A.2 one more time in height; i.e. work the next row from the right side as follows:
2 edge stitches in garter stitch, A.1A over 2 stitches (1 time in width), A.1B over 190 stitches (95 times in width), work A.1C over 3 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.2A over 3 stitches, A.2B over 190 stitches (95 times in width), A.2C over 2 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.1 and A.2 remains there are 435 stitches on the needle. Work the last row and decrease at the same time 11 stitches evenly spaced on each side of the middle stitch (22 stitches decreased evenly + 2 stitches increased in diagrams) = 415 stitches.
Work diagrams A.5 and A.6 as follows from the right side:
2 edge stitches in garter stitch, A.5A over 14 stitches (1 time in width), work A.5B over 176 stitches (8 times in width), A.5C over 15 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.6A over 14 stitches, A.5B over 176 stitches (8 times in width), A.6C over 15 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.5 and A.6 is finished there are 523 stitches on the row.
Work diagrams A.7 and A.8 as follows from the right side:
2 edge stitches in garter stitch, A.7A over 18 stitches (1 time in width), A.7B over 32 stitches (1 time in width), A.7C over 176 stitches (8 times in width), work A.7D over 33 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.8A over 32 stitches, A.7C over 176 stitches (8 times in width), A.8C over 33 stitches, A.8D over 18 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.7 and A.8 remain there are 593 stitches on the needle. Work the last row and increase at the same time 72 stitches evenly spaced on each side of the middle stitch (144 stitches increased evenly and 2 stitches increased in diagrams) = 739 stitches.
Work diagrams A.1 and A.2 as follows from the right side:
2 edge stitches in garter stitch, A.1A over 2 stitches (1 time in width), A.1B over 362 stitches (181 times in width), A.1C over 3 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.2A over 3 stitches, work A.2B over 362 stitches (181 times in width), A.2C over 2 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.1 and A.2 remains there are 779 stitches on the row. Work the last row and increase at the same time 1 on each side of the middle stitch (2 stitches increased evenly and 2 stitches increased in diagrams) = 783 stitches.
Now work A.1 and A.2 one more time in height; i.e. work as follows from the right side:
2 edge stitches in garter stitch, A.1A over 2 stitches (1 time in width), A.1B over 384 stitches (192 times in width), A.1C over 3 stitches (1 time in width), 1 stitch in stocking stitch (= middle stitch), A.2A over 3 stitches, work A.2B over 384 stitches (192 times in width), A.2C over 2 stitches and finish with 2 edge stitches in garter stitch. Continue this pattern.
When the last row in A.1 and A.2 has been completed there are 825 stitches on the row.
The piece measures approx. 65 cm measured along the middle stitch. Cast off as described below.
ELASTIC CAST-OFF EDGE
To avoid the cast-off edge being tight, cast off with knit from the right side as follows: Knit 2, * insert the left needle in the 2 stitches on the right needle, from left to right and knit them together, knit 1 , work from -* until there is 1 stitch left on the row. Cut the strand and pull it through the last stitch. Fasten strands.
SHAPING TIP
Moisten the piece and shape to the right measurements.
This pattern has been corrected. Click here to see the correction/s.
Diagram
= purl from right side, knit from wrong side
= knit from right side, purl from wrong side
= knit 1 in stitch under the next stitch
= purl 2 twisted together
= purl 2 together
= increase 1 stitch by making 1 yarn over; on next row knit or purl yarn over as shown in diagram (leavings a hole)
= increase 1 stitch by making 1 yarn over; on next row knit or purl yarn over twisted as shown in diagram (avoiding a hole)
= decrease 2 stitches towards the left as follows: Slip 1 stitch as if to knit, knit the next 2 stitches together and pass the slipped stitch over the knitted together stitches (= 2 stitches decreased)
= decrease 2 stitches towards the right as follows: Knit 3 stitches together (= 2 stitches decreased)
= decrease 4 stitches as follows: Slip 3 stitches as if to knit them together, knit the next 2 stitches together and pass the 3 slipped stitches over the knitted together stitches (= 4 stitches decreased)
