Cool Cables Set

Введение

DROPS 214-25

coolcablesset

DROPS Design: Pattern no me-209
Yarn group B

SIZES
SIZES
S/M – M/L

MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
450-500 g colour 13, denim blue

SIZES
SIZES
S/M – M/L
Fits head size: approx. 54/56 – 56/58 cm

MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
150-150 g colour 13, denim blue

Materials & Sizes

KNITTING TENSION
21 stitches in width and 28 rows in height with stocking stitch = 10 x 10 cm.

NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM.
DROPS CIRCULAR NEEDLE SIZE 4 MM: Length 40 cm.
DROPS CIRCULAR NEEDLE SIZE 3 MM: Length 40 cm for rib.
DROPS CABLE NEEDLE: For cables.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

SIZES
S/M – M/L
Length from shoulder: Approx. 36-38 cm.
Width: Approx. 36-40 cm.

MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
250-300 g colour 13, denim blue

Materials & Sizes

KNITTING TENSION
21 stitches in width and 28 rows in height with stocking stitch = 10 x 10 cm.

NEEDLES
DROPS CIRCULAR NEEDLE SIZE 4 MM: Length 40 cm and 60 cm or 80 cm.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM: Length 40 cm and 60 cm or 80 cm for rib.
DROPS CABLE NEEDLE: For cables.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

SIZES
S/M – M/L
Length: Approx. 30-32 cm. Circumference: Approx. 18-19 cm.

MATERIALS
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
100-100 g colour 13, denim blue

Materials & Sizes

KNITTING TENSION
22 stitches in width and 30 rows in height with stocking stitch = 10 x 10 cm.

NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM.
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM: For rib.
DROPS CABLE NEEDLE: For cables.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size

You might also like...
Women Accessories Hats Neck Warmers Gloves & Mittens Beanies Mittenscable high neck saddle shoulder

Pattern instructions
Keep the screen on while knitting
Tools

EXPLANATIONS FOR THE PATTERN
RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge in height = Knit 2 rows.

PATTERN

Hat: See diagrams A.1 and A.2.
Neck warmer: See diagrams A.3, A.4 and A.5.
Mittens: See diagrams A.6, A.7 and A.8.
The diagrams show all rows from the right side.

INCREASE/DECREASE TIP (evenly spaced):
To work out how to increase/decrease evenly, count the total number of stitches on needle (e.g. 108 stitches), and divide by the number of increases/decreases to be made (e.g. 24) = 4.5. In this example, increase by making 1 yarn over after alternately each 4th and 5th stitch. On the next round work the yarn overs twisted to avoid holes. When decreasing, knit together alternately each 3rd and 4th stitch and each 4th and 5th stitch.

INCREASE TIP-1 (for saddle shoulder increase):

BEFORE MARKER

The new stitch will be twisted, leaning towards the right.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from behind and knit stitch in front loop.

AFTER MARKER

The new stitch will be twisted, leaning towards the left.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from the front and knit stitch in back loop.

INCREASE TIP-2 (for thumb):
Increase 1 stitch by making 1 yarn over. On the next round knit the yarn over twisted to avoid a hole. Then work the new stitches in stocking stitch.

DECREASE TIP (top of mitten):
Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches) slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (= 2 stitches decreased).

HAT – SHORT OVERVIEW OF THE PIECE
The piece is worked in the round, bottom up. Change to double pointed needles when necessary.

HAT

Cast on 108-108 stitches with short circular needle size 3 mm and Merino Extra Fine. Work rib in the round (knit 2, purl 2) for 14-18 cm.
Change to short circular needle size 4 mm and knit 1 round where you increase 24-24 stitches evenly spaced – read INCREASE/DECREASE TIP = 132-132 stitches. Continue with A.1 in the round (= 6-6 repeats of 22 stitches). REMEMBER THE KNITTING TENSION!
When A.1 has been worked 5 times in height, work A.2 (= 6-6 repeats of 22 stitches). When A.2 has been completed there are 48-48 stitches left.
Work 2 rounds where all stitches are knitted together 2 and 2 on both rounds = 12-12 stitches.
Cut the strand, pull it through the remaining stitches, tighten and fasten well. The hat measures approx. 31-35 cm from the top down. Fold up the bottom 7-9 cm.

NECK WARMER – SHORT OVERVIEW OF THE PIECE

The piece is worked in the round with short circular needle, top down. Stitches are increased for saddle shoulders, then stitches are cast off and each section is finished separately, back and forth.

NECK WARMER

Cast on 128-136 stitches with short circular needle size 3.5 mm and Merino Extra Fine. Work rib in the round (starting from the left shoulder when the garment is worn) as follows: * Purl 2, knit 2,, work from -* to end of round. Continue this rib for 7-8 cm.
Insert 1 marker thread; the piece is now measured from here.
Insert 4 markers as described below – without working the stitches. The markers are placed between stitches and are used when increasing for saddle shoulders.
Marker 1 is inserted at the beginning of the round, count 42-42 stitches (= back piece), insert marker 2 before the next stitch, count 22-26 stitches (= shoulder), insert marker 3 before the next stitch, count 42-42 stitches (= front piece) and insert marker 4 before the next stitch. There are 22-26 stitches left for the shoulder. Allow all 4 markers to follow your work onwards.

SADDLE SHOULDER INCREASE

Change to circular needle size 4 mm and work the first round as follows: Work A.3a (= 1 stitch), A.4 (= 40 stitches), A.5a (= 1 stitch), continue with rib as before over the next 22-26 stitches, work A.3a (= 1 stitch), A.4 (= 40 stitches), A.5a (= 1 stitch), and continue with rib as before over the remaining 22-26 stitches. There are 136-144 stitches on the needle.
On the next round the increase for saddle shoulders begin, increase 4 stitches on every round as described below (the pattern continues but when A.4 is finished in height; repeat the pattern as before - see A.4b) – note that the cables on each side are worked over 8 rows in height, and the lace pattern in the middle is worked over 10 rows in height):
Increase 1 stitch AFTER markers 1 and 3 (after the 22-26 ribbed stitches) and increase 1 stitch BEFORE markers 2 and 4 (before the 22-26 ribbed stitches) – read INCREASE TIP-1 (= 4 stitches increased on the round). The number of stitches on the shoulders remains the same, the increased stitches are on the front and back pieces.
Continue the pattern and increase like this EVERY round a total of 25-31 times (a total of 24-28 stitches are also increased in A.3a and A.5a as shown in the diagrams) = 260-296 stitches. REMEMBER THE KNITTING TENSION!
After the last increase the piece measures approx. 9-11 cm along the shoulders (where the marker thread is).
When there is 1 round left in A.3a and A.5a, work as follows: Work as before as far as marker 2, cast off the 22-26 shoulder-stitches, making sure the cast-off edge is not tight, work to marker 4 and cast off the remaining 22-26 shoulder-stitches. Back and front pieces are finished separately.

BACK PIECE

= 108-122 stitches. Continue the pattern back and forth as before; i.e. the first row is worked from the right side as follows: Work A.3b over the first 32-39 stitches, continue A.4 as before over the next 44-44 stitches and work A.5b over the remaining 32-39 stitches. Continue back and forth and repeat A.3b, A.4b and A.5b in height until the piece measures approx. 33-35 cm from the shoulder, measuring close to the neck and with the piece flat (28-29 cm from the marker on the neck) – NOTE: adjust so you finish after the last row in A.4.
Change to circular needle size 3.5 mm and work rib from the right side as follows: Work 2 stitches in garter stitch, knit over knit and purl over purl the next 30-37 stitches, * knit 2, purl 2 , work from - over the next 10 stitches, purl 4, knit 2, purl 3, knit 2, purl 2, knit 2, purl 3, knit 2, purl 4, * knit 2, purl 2 , work from - over the next 10 stitches, knit over knit and purl over purl the next 30-37 stitches and finish with 2 stitches in garter stitch. Continue this rib for 3 cm. Cast off with knit over knit and purl over purl. The neck warmer measures approx 36-38 cm from the shoulder, when flat.

FRONT PIECE
= 108-122 stitches. Work in the same way as the back piece.

MITTENS – SHORT OVERVIEW OF THE PIECE
The piece is worked in the round with double pointed needles, bottom up.

RIGHT MITTEN

Cast on 48-48 stitches with double pointed needles size 3 mm and Merino Extra Fine. Work rib in the round (knit 2, purl 2) for 12-13 cm. Then work as follows: * Knit 2, purl 2 , work from -* over the first 28 stitches, knit 2, work A.6 (= 14 stitches), knit 2 and purl 2. When A.6 has been completed in height there are 52-52 stitches on the needles. Insert a marker on the round. The piece is now measured from this marker.
Change to double pointed needles size 3.5 mm and work as follows: Knit the first 27 stitches and decrease 8-6 stitches evenly over these stitches, knit 3, work A.7 (= 18 stitches) over A.6 and knit 4 = 44-46 stitches on the round. Continue this pattern onwards. REMEMBER THE KNITTING TENSION!
AT THE SAME TIME when the piece measures 1½ cm from the marker, increase for the thumb by increasing 1 stitch on each side of the first stitch on the round – read INCREASE TIP-2 (= 2 stitches increased). Increase like this on each side of the increased stitches every 2nd round a total of 5-6 times in height = 54-58 stitches.
Place the 11-13 thumb-stitches on a thread. Continue in the round – AT THE SAME TIME, on the first round, cast on 1 stitch over the stitches on the thread = 44-46 stitches.
Continue working until the mitten measures approx. 15-16 cm from the marker – adjust so the next round is not a cable-round in A.7 (i.e. not round 4 or 8).
There is approx. 3 cm left to finished length; try the mitten on and continue to desired length.
Now work A.8 over A.7 – the other stitches are worked as before. When A.8 has been completed in height there are 40-42 stitches on the needles.
Insert 1 marker thread in each side of the mitten, with 20 stitches on the palm and 20-22 stitches on the back. There are 3-4 knitted stitches between the marker threads and A.8.
On the next round decrease 1 stitch on each side of both marker threads – read DECREASE TIP (= 4 stitches decreased). Decrease like this every 2nd round a total of 3 times, then every round a total of 3 times = 16-18 stitches. On the next round knit all stitches together 2 and 2 = 8-9 stitches. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The mitten measures approx. 30-32 cm from the top down. You can turn up the 6-6½ cm of the rib. if you wish

THUMB

Place the 11-13 thumb-stitches from the thread onto double pointed needles size 3.5 mm and knit up 4-3 stitches around the opening = 15-16 stitches. Work stocking stitch in the round for 5-5½ cm. There is now ½ cm left to finished length; try the mitten on and continue to desired length. Knit 1-0, then knit the remaining stitches together 2 and 2 = 8 stitches left. On the next round knit all stitches together 2 and 2 = 4 stitches. Cut the strand, pull it through the remaining stitches, tighten and fasten well.

LEFT MITTEN

This pattern has been corrected. Click here to see the correction/s.

Diagram
= knit from right side, purl from wrong side
= purl from right side, knit from wrong side
= this square has no stitch; go straight to next symbol in diagram
= between 2 stitches make 1 yarn over, on the next round knit the yarn over twisted to avoid a hole
= between 2 stitches make 1 yarn over, on the next round knit the yarn over to leave a hole
= purl 2 together
= knit 2 together
= slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch
= place 2 stitches on cable needle in front of piece, knit 2, knit 2 from cable needle
= place 2 stitches on cable needle behind the piece, knit 2, knit 2 from cable needle