Введение
DROPS 214-23
cocoabeansset
DROPS design: Pattern ee-709
Yarn group E or C + C
SIZE
S/M – M/L
MATERIALS
DROPS SNOW from Garnstudio (belongs to yarn group E)
350-400 g colour 47, light beige
SIZE
S/M – M/L
Head circumference: Approx. 54/56– 56/58 cm
MATERIALS
DROPS SNOW from Garnstudio (belongs to yarn group E)
150-150 g colour 47, light beige
Materials & Sizes
KNITTING TENSION
11 stitches in width and 15 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 8 mm
DROPS CIRCULAR NEEDLE SIZE 8 mm: Length 40 cm for stocking stitch and textured pattern.
DROPS CIRCULAR NEEDLE SIZE 7 mm: Length 40 cm for rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M – M/L
MATERIALS
DROPS SNOW from Garnstudio (belongs to yarn group E)
150-200 g colour 47, light beige
Materials & Sizes
KNITTING TENSION
11 stitches in width and 15 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS CIRCULAR NEEDLE SIZE 8 mm : Length 40 and 60 cm for stocking stitch and textured pattern.
DROPS CIRCULAR NEEDLE SIZE 7 mm : Length 40 and 60 cm for rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
SIZE
S/M – M/L
Length: approx. 25-26 cm Circumference: approx. 20-22 cm
MATERIALS
DROPS SNOW from Garnstudio (belongs to yarn group E)
100-100 g colour 47, light beige
Materials & Sizes
KNITTING TENSION
12 stitches in width and 16 rows vertically in stocking stitch = 10 x 10 cm.
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 7 mm: For stocking stitch and textured pattern.
DROPS DOUBLE POINTED NEEDLES SIZE 6 mm: For rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.
You might also like...
Women Accessories Hats Neck Warmers Gloves & Mittens Beanies Chunky Knits Mittenschunky knits high neck relief saddle shoulder
Pattern instructions
Keep the screen on while knitting
Tools
EXPLANATION FOR THE PATTERN
GARTER STITCH (worked in the round):
1 ridge vertically = 2 rounds, i.e. knit 1 round and purl 1 round.
GARTER STITCH (back and forth):
Knit all rows.
1 ridge vertically = knit 2 rows.
PATTERN
Hat: See diagram A.1.
Neck warmer: See diagram A.2.
Mittens: See diagram A.3.
Diagrams show all rows in pattern seen from the right side.
DECREASE TIP (applies to top of hat):
Decrease as follows before marker thread: Begin 2 stitches before marker thread, knit 2 together (= 1 stitch decreased).
Decrease as follows after marker thread: Slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 1 stitch decreased).
INCREASE TIP (applies to saddle shoulder increase on neck warmer):
BEFORE MARKER
The new stitch will be twisted, leaning towards the right.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from behind and knit stitch in front loop.
AFTER MARKER
The new stitch will be twisted, leaning towards the left.
Use left needle to pick up strand between 2 stitches from the round below, pick up strand from the front and knit stitch in back loop.
HAT - SHORT OVERVIEW OF THE PIECE
Worked in the round on a short circular needle, bottom up. Switch to double pointed needles when needed. Fold the bottom 9 cm upwards.
HAT
Cast on 54-56 stitches on a short circular needle size 7 mm with Snow. Work rib in the round = knit 1/purl 1 for 12 cm.
Switch to a short circular needle size 8 mm, and work in stocking stitch in the round. REMEMBER THE KNITTING TENSION!
When piece measures 18-19 cm from cast-on edge, work A.1 in the round. When A.1 has been worked, work the rest of hat in stocking stitch.
When piece measures 29-30 cm from cast-on edge, begin decreases at the top of hat, and decrease as explained below.
Insert 6-7 marker threads 9-8 stitches apart (this is done without working the stitches). On first round decrease 1 stitch on each side of 6-7 marker threads – read DECREASE TIP (= 12-14 stitches decreased).
Decrease like this every 3rd-4th round 3 times in total vertically = 18-14 stitches remain. Work 1 round without decrease.
On next round knit all stitches together 2 by 2 = 9-7 stitches remain. Cut the yarn. Pull yarn through the remaining stitches, tighten and fasten. Piece measures approx. 35-37 cm from top and down. Fold the bottom 9 cm of hat.
NECK WARMER - SHORT SUMMARY OF PIECE
Worked in the round on circular needle, top down. Increase out for saddle shoulder in each side. Then divide the piece - work back piece and front piece back and forth separately on circular needle until finished measurements.
NECK WARMER
Cast on 50-58 stitches on a short circular needle size 7 mm with Snow. Work rib in the round as follows (from left shoulder on the back when neck warmer is worn): * Purl 1, knit 1 , work from - over the first 18-20 stitches, purl 2, knit 1, work from - over the next 22-26 stitches, purl 2, knit 1, work from -* over the remaining 4-6 stitches.
Continue rib like this for 10 cm or desired length.
Now insert 4 markers in piece (without working the stitches): Place markers between stitches, and use markers when increasing for saddle shoulders.
Insert first marker at the beginning of round, count 13-13 stitches (= back piece), insert 2nd marker before next stitch, count 12-16 stitches (= shoulder – the 2 purl stitches are in the middle of these 12-16 stitches), insert 3rd marker before next stitch, count 13-13 stitches (= front piece), insert 4th marker before next stitch. 12-16 stitches remain on round after last marker (= shoulder – the 2 purl stitches are in the middle of these 12-16 stitches). Switch to circular needle size 8 mm, and increase for saddle shoulder as explained below.
SADDLE SHULDER INCREASE
Work in stocking stitch over the 13-13 stitches on back piece and front piece, and rib as before over the 12-16 stitches on each shoulder. REMEMBER THE KNITTING TENSION!
AT THE SAME TIME increase for saddle shoulders on every round as follows: Increase BEFORE 2nd and 4th marker and AFTER 1st and 3rd marker – read INCREASE TIP (= 4 stitches increased – the increased stitches are part of front and back piece, i.e. the 12 shoulder stitches are constant).
Increase like this EVERY round - 8-10 times in total = 82-98 stitches.
Then work 4 rounds as before (with increases as before on each of these 4 rounds), but over the 12-16 stitches on each shoulder work 2 ridges in GARTER STITCH – read explanation above = 98-114 stitches on row after last round with increase.
On next round cast off shoulder stitches, i.e. work next round as follows: Purl 3, work in stocking stitch until 3 stitches remain before 2nd marker, purl 3, loosely cast off the 12-16 shoulder stitches, purl 3, work in stocking stitch until 3 stitches remain before 4th marker, purl 3, and loosely cast off the remaining 12-16 shoulder stitches.
Finish back piece and front piece separately.
BACK PIECE
= 37-41 stitches. Work first row as follows from right side: 3 edge stitches in GARTER STITCH – read explanation above, work A.2 until 4 stitches remain on row, work first stitch in A.2 (so that pattern begins and ends the same way in each side), and finish with 3 edge stitches in garter stitch.
Continue A.2 back and forth as before with 3 edge stitch in garter stitch in each side. When A.2 has been worked vertically, piece measures approx. 32-33 cm from cast-on edge (measured mid back).
Switch to circular needle size 7 mm, and work rib from right side as follows: 3 edge stitches in garter stitch, * knit 1, purl 1 , work from -* until 4 stitches remain on needle, knit 1 and finish with 3 edge stitches in garter stitch. When 4 rows rib have been worked, loosely cast off with knit over knit and purl over purl. Piece measures approx. 34-35 cm from cast-on edge mid back.
FRONT PIECE
= 37-41 stitches. Work as on back piece.
MITTENS - SHORT OVERVIEW OF THE PIECE
Work piece in the round on double pointed needles, bottom up.
LEFT MITTEN
Cast on 24-26 stitches on double pointed needles size 6 mm with Snow. Work rib in the round = knit 1/purl 1 for 6 cm.
Switch to double pointed needles size 7 mm, and work A.3 in the round over all stitches. Continue the pattern like this - work A.3 2 times in total vertically, then work the rest of mitten in stocking stitch. REMEMBER THE KNITTING TENSION!
AT THE SAME TIME when piece measures 12-13 cm, work an opening for thumb on next round as follows: Work 6-6 stitches as before, slip the next 5-6 stitches on 1 stitch holder for thumb, cast on 5-6 new stitches on needle over stitches on stitch holder, and work the remaining 13-14 stitches as before = 24-26 stitches on needles.
Work until piece measures 22-23 cm. Approx. 3 cm remain until finished measurements, try the mitten on and work until desired length.
On next round, decrease 6-6 stitches evenly (knit every 3rd and 4th stitch together) = 18-20 stitches remain.
Work 2 rounds without decrease. On next round knit all stitches together 2 by 2 = 9-10 stitches remain. On next round knit all stitches together 2 by 2 = 5-5 stitches remain. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Mitten measures approx. 25-26 cm from top and down.
THUMB
Slip the 5-6 stitches from stitch holder on double pointed needles size 7 mm, and pick in addition up 7-8 new stitches around opening for thumb = 12-14 stitches distributed on double pointed needles 7. Work in stocking stitch in the round – AT THE SAME TIME on first round decrease 2 stitches evenly = 10-12 stitches remain. Work until thumb measures approx. 6-7 cm (measured from where stitches were put back on needles). Approx. 1 cm remain until finished measurements, try the mitten on and work until desired length on thumb.
Work 2 rounds in stocking stitch where all stitches are knitted together 2 by 2 on both rounds = 3-3 stitches remain. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Thumb measures approx. 7-8 cm.
RIGHT MITTEN
Cast on the same number of stitches as on left mitten and work rib in the round the same way as on left mitten for 6 cm. Switch to double pointed needles size 7 mm and work A.3 in the round the same way as on left mitten.
When piece measures 12-13 cm, work an opening for thumb on next round as follows: Work 13-14 stitches as before, slip the next 5-6 stitches on 1 stitch holder for thumb, cast on 5-6 new stitches on needle over stitch on stitch holder, and work the remaining 6-6 stitches as before = 24-26 stitches on needles.
Work the rest of the mitten the same way as left mitten.
THUMB
Work the same way as thumb on left mitten.
Diagram
= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
