Введение
DROPS 214-2
blushingfallset
DROPS Design: Pattern no z-906
Yarn group A + A or C
SIZES
SIZES
S/M – L/XL
Fits head size: approx. 54/58 cm
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
100-100 g colour 9026, blush
and use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
50-50 g colour 33, rust
SIZE
One-size
Fits head size: approx. 54/58 cm
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
100 g colour 9026, blush
and use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25 g colour 33, rust
Materials & Sizes
KNITTING TENSION
20 stitches in width and 27 rows in height with stocking stitch and 1 strand of each quality = 10 x 10 cm.
Approx. 25 stitches in rib (= knit 1, purl 1) measures 10 cm in width (when flat).
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM: Length 40 cm.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.
SIZES
S/M - M/L
MATERIALS
DROPS ALPACA from Garnstudio (belongs to yarn group A)
50-50 g colour 9026, blush
and use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
25-25 g colour 33, rust
Materials & Sizes
KNITTING TENSION
20 stitches in width and 27 rows in height with stocking stitch and 1 strand of each quality = 10 x 10 cm.
Approx. 25 stitches in rib (= knit 1, purl 1) measures 10 cm in width (when flat).
NEEDLES
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.
You might also like...
Women Accessories Hats Gloves & Mittens Beanies Mittensrib
Pattern instructions
Keep the screen on while knitting
Tools
EXPLANATIONS FOR THE PATTERN
DECREASE TIP-1 (for hat):
Decrease 8 stitches on each decrease-round.
Work until there are 5 stitches left before the stitch with the marker, knit 2 together, work rib as before over the next 7 stitches, slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over.
Repeat at all the other markers.
DECREASE TIP-2 (for mittens):
Decrease 1 stitch on each side of the marker thread as follows: Work until there are 5 stitches left before the stitch with the marker, knit 2 together, work rib as before over the next 7 stitches (the middle of these stitches has the marker thread), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over.
INCREASE TIP (for mittens):
Increase 1 stitch by making 1 yarn over. On the next round work the yarn over twisted to avoid a hole. Then work the new stitch in rib.
HAT – SHORT OVERVIEW OF THE PIECE
The piece is worked in the round with circular needle, bottom up. Change to double pointed needles when necessary.
HAT
Cast on 120 stitches with circular needle size 3.5 mm and 1 strand Alpaca and 1 strand Kid-Silk (= 2 strands). Purl 1 round.
Work rib (= knit 1, purl 1) in the round. REMEMBER THE KNITTING TENSION!
When the piece measures 23 cm, insert 4 markers as follows: Insert the first marker in the first knitted stitch on the round (in the stitch, not between 2 stitches) and the other 3 markers with 29 stitches between each marker-stitch. All the markers are inserted into knitted stitches.
Continue with rib and on the next round begin to decrease - read DECREASE TIP-1. Decrease like this every 2nd round 10 times = 40 stitches left.
The next round is worked as follows: * Rib as before over the first 4 stitches, slip 1 stitch as if to knit, knit 2 together and pass the slipped stitch over the knitted-together stitches (= 2 stitches decreased), rib over the next 3 stitches , work from -* a total of 4 times on the round = 32 stitches. Work 1 round with knit over knit and purl over purl. Knit all stitches together 2 and 2 = 16 stitches. Cut the strand, thread it through the remaining stitches, tighten and fasten well. The hat measures approx. 25 cm with a 6 cm turn-up (= a total of 31 cm).
MITTENS – SHORT OVERVIEW OF THE PIECE
The piece is worked in the round with double pointed needles.
RIGHT MITTEN
Cast on 40-48 stitches with double pointed needles size 3.5 mm and 1 strand Alpaca and 1 strand Kid-Silk (= 2 strands). Insert a marker thread at the beginning of the round and work rib (= knit 1, purl 1) in the round for 8-8 cm. REMEMBER THE KNITTING TENSION!
Insert a marker in the first stitch (a knitted stitch = thumb-stitch). Continue with rib and increase 1 stitch on each side of the thumb-stitch (= 2 stitches increased) – read INCREASE TIP! Increase like this, on each side of the increased stitches, every 2nd round a total of 5-6 times = 50-60 stitches. Now place the 11-13 thumb-stitches on a thread.
Continue in the round with rib and cast on 1 stitch behind the thumb-stitches on the next round = 40-48 stitches.
When the mitten measures 22-22 cm (there is approx. 5-7 cm left to finished length; you can try the mitten on and work to desired length), insert 2 marker threads (in the stitch, not between 2 stitches) as follows: Insert the first thread in the 11th-13th stitch (= 1 knitted stitch under the mitten) and the other thread in the 31st-33rd stitch (= 1 knitted stitch on top of the mitten).
Continue with rib and begin to decrease on the next round - read DECREASE TIP-2. Decrease like this every 4th round 1-1 time then every 2nd round 4-6 times = 20-20 stitches.
Knit all stitches together 2 and 2; 5-5 stitches left. Cut the strand, thread it through the remaining stitches, tighten and fasten well. The mitten measures approx. 27-29 cm.
THUMB
Place the 11-13 thumb-stitches from the thread back on double pointed needles size 3.5 mm and knit up 3-3 stitches behind the thumb = 14-16 stitches. Work rib in the round until the thumb measures 5½-6 cm (there is approx. ½ cm left to finished length; you can try the mitten on and work to desired length). Knit all stitches together 2 and 2 until there are 4 stitches left. Cut the strand, thread it through the remaining stitches, tighten and fasten well.
LEFT MITTEN
Cast on 40-48 stitches with double pointed needles size 3.5 mm and 1 strand Alpaca and 1 strand Kid-Silk (= 2 strands). Insert a marker thread at the beginning of the round and work rib (= knit 1, purl 1) in the round for 8-8 cm.
Insert a marker in the 19th-23rd stitch on the round (= thumb-stitch). Continue with rib and increase 1 stitch on each side of the thumb-stitch (= 2 stitches increased) – remember INCREASE TIP! Increase like this, on each side of the increased stitches, every 2nd round a total of 5-6 times = 50-60 stitches. Now place the 11-13 thumb-stitches on a thread.
Continue with rib and cast on 1 stitch behind the thumb-stitches on the next round = 40-48 stitches.
When the mitten measures 22-22 cm (there is approx. 5-7 cm left to finished length; you can try the mitten on and work to desired length), insert 2 marker threads (in the stitch, not between 2 stitches) as follows:
Insert the first thread in the 11th-13th stitch (= 1 knitted stitch under the mitten) and the other thread in the 31st-33rd stitch (= 1 knitted stitch on top of the mitten).
Continue with rib and begin to decrease on the next round - remember DECREASE TIP-2. Decrease like this every 4th round 1-1 time then every 2nd round 4-6 times = 20-20 stitches.
Knit all stitches together 2 and 2; there are 5-5 stitches left. Cut the strand, thread it through the remaining stitches, tighten and fasten well. The mitten measures approx. 27-29 cm.
THUMB
Work in the same way as the right thumb.
