Введение
DROPS 141-25
raniset
DROPS design: Pattern no me-056 + me-057
Yarn group B
HAT
Size: S/M - M/L
Head circumference: approx. 54/56 - 56/58 cm
Materials:
DROPS MERINO EXTRA FINE from Garnstudio
100-100 g colour no 08, light beige
DROPS CROCHET HOOK SIZE 4 mm – or size needed to get 18 tr x 9 rows = 10 x 10 cm.
NECK WARMER
Size: S/M - M/L
Height: approx. 23 - 25 cm (incl fan edges).
Circumference: approx. 56 - 64 cm
Materials:
DROPS MERINO EXTRA FINE from Garnstudio
150-150 g colour no 08, light beige
DROPS CROCHET HOOK SIZE 4.5 mm – or size needed to get 16 tr = width 10 cm.
MITTENS
Size: S/M - M/L
Materials:
DROPS MERINO EXTRA FINE from Garnstudio
100-100 g colour no 08, light beige
DROPS CROCHET HOOK SIZE 4 mm – or size needed to get 18 tr x 9 rows = 10 x 10 cm.
You might also like...
Women Accessories Hats Neck Warmers Gloves & Mittens Beanies Mittensfan pattern lace top down
Pattern instructions
Keep the screen on while crocheting
Tools
CROCHET INFO
Replace first dc at beg of every dc round with 1 ch and finish every round with 1 sl st in ch from beg of round.
Replace first tr at beg of every tr round with 3 ch and finish every round with 1 sl st in 3rd ch from beg of round.
INCREASE TIP
Inc 1 dc by working 2 dc in same st.
Inc 1 tr by working 2 tr in same st.
CROCHET 2 TR TOG:
Work 1 tr but wait with last pull through (= 2 sts on hook), then work next tr but on last pull through, pull thread through all sts on hook = 1 st dec.
CROCHET 2 DC TOG:
Work 1 dc but wait with last pull through, work next dc and pull thread through all 3 sts on hook.
HAT
Worked in the round, top down. READ CROCHET INFO!
Crochet 4 ch on hook size 4 mm with Merino Extra Fine and form a ring with 1 sl st in first ch.
ROUND 1: Work 6 tr in ch-ring.
ROUND 2: Work 2 tr in every tr the entire round = 12 tr.
ROUND 3: Work * 1 tr in first tr, 2 tr in next tr , repeat from - the entire round = 18 tr.
ROUND 4: Work * 1 tr in each of the first 2 tr, 2 tr in next tr , repeat from - the entire round = 24 tr.
Continue inc like this until there are 84-96 tr on round (i.e. on every round work 1 tr more before working 2 tr in same tr so that 6 tr are inc on every round). Then work in the round with 1 tr in every tr (i.e. do not inc) until hat measures approx. 26-28 cm from the top and down.
Now work 1 round with dc while AT THE SAME TIME inc 6-4 dc evenly – READ INCREASE TIP = 90-100 dc on round, do not cut the thread, turn piece and work fan edge in the round from WS as follows:
FAN EDGE
ROUND 1 (= WS): 1 dc in first st, * skip 3 sts, in next dc work 3 tr + 1 ch + 3 tr, skip 3 dc, 1 dc in next dc , 1 ch, skip 1 dc, 1 dc in next st , repeat from -* but finish last repetition on round after , then work 1 ch and 1 sl st in dc from beg of round.
ROUND 2: 5 ch (= 1 tr + 2 ch), 1 tr in same st from beg of round, * 3 ch, 1 dc in ch in the middle of tr-group, 3 ch , in next ch work 1 tr + 2 ch + 1 tr , repeat from -* the entire round but finish last repetition after , then work 1 sl st in 3rd ch from beg of round.
ROUND 3: 3 ch (= 1 tr), 2 tr in ch-loop before next tr, 1 ch, 3 tr in same ch-loop, * 1 ch, 1 dc in next ch-loop, 1 ch, 1 dc in next ch-loop, 1 ch , in next ch-loop work 3 tr + 1 ch + 3 tr , repeat from -* but finish last repetition after , then work 1 sl st in 3rd ch from beg of round.
ROUND 4: Work sl sts until ch in the middle of tr-group, 1 dc in ch in the middle of tr-group, * 3 ch, in ch between 2 dc work 1 tr + 2 ch + 1 tr, 3 ch , 1 dc in ch in the middle of tr-group , repeat from -* but finish last repetition after , then work 1 sl st in dc from beg of round.
ROUND 5: 1 sl st in first ch-loop, 1 dc in same ch-loop, 1 ch, * in next ch-loop (the 2 ch between 2 tr) work 3 tr + 1 ch + 3 tr, 1 ch, 1 dc in next ch-loop, 1 ch , 1 dc in next ch-loop, 1 ch, repeat from - but finish last repetition after , then work 1 sl st in dc from beg of round. Cut and fasten the threads. Fold the fan edge out towards RS.
NECK WARMER
Worked in the round, top down. Work the fan edges at the end. Crochet 90-102 LOOSE ch on hook size 4.5 mm with Merino Extra Fine and form a ring with 1 sl st in first ch.
ROUND 1: READ CROCHET INFO! Work 1 tr in every ch the entire round = 90-102 tr.
Then work in the round with 1 tr in every tr until piece measures approx. 16-18 cm. Now work 1 dc round with 1 dc in every tr = 90-102 dc. Work 1 more round with dc while AT THE SAME TIME inc 50-48 dc evenly - READ INCREASE TIP = 140-150 dc. Do not cut the thread, now work the fan edge in the round from RS as follows:
FAN EDGE (at the bottom around the neck warmer):
ROUND 1: 1 dc in first st, 1 ch, skip 1 st, 1 dc in next st, * skip 3 sts, in next dc work 3 tr + 1 ch + 3 tr, skip 3 dc , 1 dc in next dc, 1 ch, skip 1 dc, 1 dc in next st , repeat from -* but finish last repetition on round after , then work 1 sl st in first dc from beg of round.
ROUND 2: 1 sl st in first ch, 5 ch (= 1 tr + 2 ch), 1 tr in same ch, * 3 ch, 1 dc in ch in the middle of tr-group, 3 ch , in next ch work 1 tr + 2 ch + 1 tr , repeat from -* the entire round but finish last repetition on round after , then work 1 sl st in 3rd ch from beg of round.
ROUND 3: 1 sl st in ch-loop between 2 tr, 3 ch (= 1 tr), 4 tr in same ch-loop, 2 ch, 5 tr in same ch-loop, * 1 ch, 1 dc in next ch-loop, 1 ch, 1 dc in next ch-loop, 1 ch , in next ch-loop (between the 2 tr) work 5 tr + 2 ch + 5 tr , repeat from -* the entire round but finish last repetition after , then work 1 sl st in 3rd ch from beg of round. Cut and fasten the thread.
FAN EDGE (at the top around the neck warmer):
Work 1 dc in first st, * 1 ch, skip 2 sts, in next dc work 3 tr + 1 ch + 3 tr, 1 ch, skip 2 dc , 1 dc in next st , repeat from -* but finish last repetition on round after , then work 1 ch and 1 sl st in dc from beg of round.
Cut and fasten the thread.
MITTEN
Work first a round cuff with fan pattern, then work new sts around the opening and then work the mitten in the round until finished measurements.
CUFF
Crochet 30 VERY LOOSE ch on hook size 4 mm with Merino Extra Fine and form a ring with 1 sl st in first ch.
ROUND 1: READ CROCHET INFO! Work 1 dc in every ch the entire round = 30 dc.
ROUND 2: Work 1 dc in every dc = 30 dc.
ROUND 3: 1 dc in first st, 1 ch, skip 1 dc, 1 dc in next dc, * skip 3 sts, in next dc work 3 tr + 1 ch + 3 tr, skip 3 dc , 1 dc in next dc, 1 ch, skip 1 dc, 1 dc in next dc, repeat from -* but finish last repetition on round after , then work 1 sl st in first dc from beg of round.
ROUND 4: 1 sl st in first ch, 5 ch (= 1 tr + 2 ch), 1 tr in same ch, * 3 ch, 1 dc in the middle of tr-group, 3 ch , in next ch work 1 tr + 2 ch + 1 tr , repeat from -* the entire round but finish last repetition after , then work 1 sl st in 3rd ch from beg of round.
ROUND 5: 1 sl st in ch-loop between 2 tr, 3 ch (= 1 tr), 2 tr in same ch-loop, 1 ch, 3 tr in same ch-loop, * 1 ch, 1 dc in next ch-loop, 1 ch, 1 dc in next ch-loop, 1 ch , in next ch-loop (between the 2 tr) work 3 tr + 1 ch + 3 tr , repeat from -* the entire round but finish last repetition after , then work 1 sl st in 3rd ch from beg of round.
ROUND 6: Work sl sts until ch in the middle of tr-group, 1 dc in ch in the middle of tr-group, * 3 ch, in ch between 2 dc work 1 tr + 2 ch + 1 tr, 3 ch , 1 dc in ch in the middle of tr-group , repeat from -* but finish last repetition after , then work 1 sl st in dc from beg of round.
ROUND 7: 1 sl st in first ch-loop, 1 ch, * in next ch-loop (the 2 ch between 2 tr) work 3 tr + 1 ch + 3 tr, 1 ch, 1 dc in next ch-loop, 1 ch , 1 dc in next ch-loop, 1 ch, repeat from - but finish last repetition after , then work 1 sl st in sl st from beg of round. Cut and fasten the threads.
MITTEN
READ CROCHET INFO. Start at beg of round on ch-row worked at the beg of mitten and work 1 dc in every st around the entire cuff = 30 dc. Insert 1 marker at beg of round (move the marker upwards when working) – NOW MEASURE PIECE FROM HERE. Now work tr in the round with 1 tr in every st while AT THE SAME TIME adjusting no of sts to 27-30 tr on 1st round – READ CROCHET 2 TR TOG. AT THE SAME TIME when piece measures 8-9 cm, inc for thumb on each side of 2nd st at beg of round - inc 1 tr on each side of 2nd st – READ INCREASE TIP. Repeat inc on each side of this st on every round 3-4 more times = 35-40 tr on round (thumb sts = 9-11 tr). Work next round as follows: Work 1 sl st in each of the first 10-12 tr at beg of round, 3 ch (= 1 tr), then work 1 tr in each of the next 25-28 tr, 1 ch and finish with 1 sl st in 3rd from beg of round = 26-29 tr and 1 ch on round. On next round work 1 tr in every tr and 1 tr in ch at the end of round = 27-30 tr. Then work tr in the round until mitten measures approx. 20-21 cm from marker (try the mitten on, approx. 3 cm remain until finished measurements).
Continue to work as follows:
ROUND 1: Work 1 tr in every tr while AT THE SAME TIME working every 2nd and 3rd tr tog - see explanation above = 18-20 tr.
ROUND 2: Work 1 tr in every tr while AT THE SAME TIME working 2 and 2 tr tog = 9-10 tr.
ROUND 3: Work 1 dc in every tr while AT THE SAME TIME working 2 and 2 dc tog. Cut the thread, baste it up and down through sts, pull the thread to tighten and fasten tightly.
THUMB
ROUND 1: Work 1 sl st in the first of the 9-11 thumb sts, 3 ch (= 1 tr), then work 1 tr in each of the next 8-10 tr, then work 6 tr in st behind thumb while AT THE SAME TIME working these 6 tr tog 2 by 2 – see explanation above = 12-14 tr.
ROUND 2 to 4: Work 1 tr in every tr = 12-14 tr.
Try the mitten on, approx. 1 cm remains until thumb is done. Work if needed 1 more round with 1 tr in every tr.
Continue to work as follows:
ROUND 1: Work 1 tr in every tr while AT THE SAME TIME working 2 and 2 tr tog = 6-7 tr.
ROUND 2: Work 1 dc in every tr while AT THE SAME TIME working 2 and 2 dc tog.
Cut the thread, baste it up and down through sts, pull the thread to tighten and fasten tightly.
Work another mitten the same way but reversed. I.e. inc for thumb on each side of next to last st on round (instead of each side of 2nd st on round). And work first round after all thumb inc as follows: 3 ch (= 1 tr), 1 tr in each of the next 25-28 tr, 1 ch and 1 sl st in 3rd ch from beg of round = 26-29 tr. On next round work 1 tr in every tr and 1 tr in ch at the end of round = 27-30 tr.
This pattern has been corrected. Click here to see the correction/s.
